Your Cleaning Scope Was Written for a Building That No Longer Exists

Posted on November 18, 2026

Most commercial cleaning scopes in this region describe a building where the same number of people arrive five days a week. That building stopped existing several years ago, and the scope mostly did not change — or it changed once, in the wrong direction, by cutting every line in proportion to how empty the building seemed.

Here is the number that explains why that cut did not work.

The average is not the number your restrooms experience

Kastle Systems publishes the Back to Work Barometer from anonymised keycard, fob and mobile app access data — actual badge swipes rather than a survey — covering over 300,000 users across ten US metros, measured against a baseline of average weekly first-swipe activity in a three-week window in February 2020.

For the week ending 21 October 2026:

  • The ten-city weekly average was 56.1% of the February 2020 baseline.
  • Tuesday 20 October was 66.1% — ten points above the weekly average. Six of the ten cities peaked on Tuesday.
  • And in Class A+ buildings, that Tuesday ran at 92.3%, against a 76.7% weekly average for the same building class.

Read the last one again. A premium office building on a Tuesday in October 2026 was operating at 92.3% of its pre-pandemic occupancy.

Nearly full. On the day everyone comes in. In a building whose cleaning scope was very possibly reduced when occupancy “fell to about half.”

That is the whole problem in one comparison. The weekly average is a planning number for a landlord. It is not the number the restrooms, the kitchens or the entrances experience on any particular day.

Three kinds of cleaning work, three different ways they scale

The reason a proportional cut fails is that cleaning labour is not one thing. It splits into three categories that respond to occupancy completely differently, and almost every scope treats them as if they respond the same way.

  1. Work that scales with area, and not with people at all.

Floors, carpet, glass, dusting, hard floor care. Ten thousand square feet of carpet is ten thousand square feet whether thirty people walk on it or eighty. ISSA 612, the production-rate standard the industry costs from, prices this work per square foot — corridors at 5,000–6,000 sq ft per hour, general office at 3,500–5,000. Fewer occupants does not shrink the building.

Reducing frequency here saves money, but it saves it by doing less maintenance on an asset that is still the same size. That is a decision about floor life, not about occupancy.

  1. Work that genuinely scales with headcount.

Trash volume, consumable usage, break room traffic. This is real, it is the one category where a proportional reduction makes sense, and it is usually the smallest line in the scope.

  1. Work that scales with PEAK occupancy, not average occupancy.

Restrooms, kitchens, entrances, conference rooms, elevator cabs. And this is where the proportional cut does its damage.

A restroom serving eighty-five people on Tuesday needs Tuesday service sized for eighty-five people. It does not care that Friday was quiet. You cannot average a restroom — there is no half-clean state that gets you through a busy day, and the fixture count has not changed. ISSA treats restrooms as fixture work rather than area work for exactly this reason: a toilet takes four to five minutes whether the building is full or empty, and you still have the same number of toilets you had in 2019.

So a building that cut its restroom frequency by the same proportion as its average occupancy has under-served its busiest days and over-served its quietest ones, simultaneously.

The shape of the soil changed, not just the volume

There is a second-order effect that scopes almost never account for.

People now come into the office largely to do things that require other people. Which means private offices and individual desks sit empty for much of the week, while conference rooms, meeting space and collaboration areas absorb a disproportionate share of use — often more intensive use than they got when the building was full every day, because the meetings have been concentrated into fewer days.

ISSA rates a conference room at 3,000–4,000 sq ft per hour against 3,500–5,000 for general office space — conference space is already slower per square foot, and it is now being used harder.

So the soil map of your building has a different shape than the one your scope was drawn against. The quiet areas are quieter than the scope assumes and the busy areas are busier. A uniform cut gets both wrong.

What variable-frequency scoping actually looks like

The answer is not a smaller scope. It is a differently shaped one, with day-specific frequencies instead of a single weekly pattern.

Work Scales with Peak days Low days
Restrooms — full service and restock Peak occupancy Full service, plus a mid-day check Full service once
Kitchen and break room Peak occupancy Full service, plus post-lunch reset Reduced
Conference and meeting rooms Peak occupancy Nightly, plus turnover during the day As scheduled
Entrances, lobby, matting Peak occupancy Full service Reduced, weather permitting
Trash and recycling Headcount Full collection Reduced collection, occupied zones only
Consumables restocking Headcount Checked and restocked Checked
Vacuuming — open areas Area Traffic lanes Full coverage on a rotation
Private offices and unoccupied zones Area Rotation Rotation — this is the genuine saving
Hard floor maintenance Area Unchanged Unchanged
Dusting, glass, high-touch points Area and peak Per scope Per scope

Note what happens to the quiet days. They are not wasted — they are when the area-driven work gets done properly, because the building is empty enough to do it. Full-coverage vacuuming, detail work and periodic tasks belong on Monday and Friday, not squeezed around a full office on Tuesday.

That is the shift in thinking. You are not buying less cleaning. You are buying the right cleaning on the right day. In most buildings that is roughly cost-neutral, and the buildings where it genuinely saves money are the ones with large amounts of persistently unoccupied individual office space.

Find your own peak day, because the published average will mislead you

This is the practical step, and it takes one email to whoever runs your access control.

Pull a weekday badge-swipe report for the last three months. You want the average entries by day of week, and the peak day’s number as a share of the week’s total. That single report tells you more about how to shape your scope than any industry figure.

And do not assume Tuesday. In the Kastle data for that October week, six of ten cities peaked on Tuesday — but Los Angeles and San Jose both peaked on Wednesday, at 52.8% and 54.0%. West Coast markets do not necessarily follow the national pattern.

Worth knowing for context here: Kastle’s index covers ten metros and Sacramento is not one of them. Its California cities all sit below the ten-city average — San Francisco 47.6%, Los Angeles 46.6%, San Jose 46.0%, against the 56.1% average for that week. Kastle is also explicit that its data is “not a national statistical sample.”

Which is the honest version of the advice: the figures above are good for understanding the shape of the problem. Your own badge data is the only thing that tells you the shape of your problem. We cannot tell you your peak day. You can find it out this week.

One more local factor to check rather than assume: downtown Sacramento’s occupancy is heavily influenced by state agency tenancy, so public-sector attendance policy will move a Capitol-area building’s pattern in ways that a private suburban office park’s will not. Worth knowing which of those you are before you redesign anything.

How the proportional cut usually fails

It is worth describing the failure mode, because it is predictable and it rarely gets diagnosed correctly.

Occupancy drops. The scope gets cut across the board, roughly in line with the average. For a few weeks nothing much happens, because the building has slack in it.

Then complaints start — and they cluster. Restrooms on the busy days. The kitchen after lunch midweek. Conference rooms not reset. But the complaints arrive as individual incidents over several weeks, nobody plots them against the day of the week, and the conclusion drawn is the simplest available one: the cleaning company has got worse.

Often it has not. It is delivering exactly what the amended scope specifies, on a pattern that no longer matches how the building is used. Which is a scope problem wearing a performance problem’s clothing, and it is one of the more common reasons a provider gets replaced without anything improving.

So if you have already made a proportional cut and you are now unhappy: before you change providers, plot your complaints by day of week. If they cluster on your peak days, the scope is the thing to fix.

Three honest things

There is real money to be saved — just not where you looked for it. The genuine saving is in persistently unoccupied individual office space, where full nightly service of empty rooms can move to a rotation. That is a specific, bounded reduction. Cutting restroom and kitchen frequency to match an average occupancy figure is not a saving, it is a deferral that comes back as complaints.

Do not cut and wait to see what happens. It is the obvious approach and it is the one that produces the failure above, because the feedback arrives too slowly and too scattered to interpret. Reshape the frequency with your badge data in hand, then measure for a month with inspections on both a peak and a low day.

And we cannot tell you your peak day — nor what happened at other buildings that tried this. We would rather say that than offer you a case study we have dressed up. What we can do is read your badge report with you and rewrite the frequency table against it.

Frequently asked questions

Should I reduce cleaning frequency for a hybrid office?

Not uniformly. Cleaning labour splits into work that scales with area (floors, glass, dusting — unchanged by occupancy), work that scales with headcount (trash and consumables — genuinely reducible), and work that scales with peak occupancy rather than average (restrooms, kitchens, entrances, conference rooms). Cutting every line in proportion to average occupancy under-serves the busy days and over-serves the quiet ones at the same time. The better approach is variable frequency by day of week.

How full are offices now?

Kastle Systems’ Back to Work Barometer, built from badge-swipe access data across ten US metros against a February 2020 baseline, recorded a ten-city weekly average of 56.1% for the week ending 21 October 2026. Tuesday 20 October reached 66.1%, ten points above the weekly average, and Class A+ buildings ran at 92.3% that Tuesday against a 76.7% weekly average for that building class. Kastle notes its data is not a national statistical sample, and Sacramento is not among the ten cities covered.

Why do restroom complaints increase after a cleaning frequency reduction?

Because restrooms scale with peak occupancy, not average occupancy. The fixture count has not changed, and ISSA treats restroom cleaning as fixture work rather than area work — a toilet takes four to five minutes regardless of how full the building is. A restroom serving eighty-five people on a peak day needs service sized for that day, and there is no averaged, half-serviced state that carries it through. Complaints that cluster on specific weekdays are usually a frequency-pattern problem rather than a provider performance problem.

What is variable-frequency cleaning?

A scope with day-specific frequencies rather than one weekly pattern. Peak-occupancy work — restrooms, kitchens, entrances, conference rooms — is weighted to the two or three busiest days, sometimes with a mid-day check. Headcount-driven work such as trash and consumables reduces on low-occupancy days. Area-driven work such as full-coverage vacuuming, detail work and periodic tasks moves to the quiet days, when the building is empty enough to do it properly.

How do I find my building’s peak day?

Ask whoever manages your access control for a weekday badge-swipe report covering the last three months, showing average entries by day of week and the peak day as a share of the week’s total. Do not assume Tuesday — in Kastle’s October 2026 data six of ten cities peaked on Tuesday, but Los Angeles and San Jose both peaked on Wednesday. Your own data is the only reliable guide to your own pattern.

Bring us your badge report

JAN-PRO Commercial Cleaning in Sacramento will sit down with your access-control report and rewrite the frequency table against how your building is actually used — including telling you which lines should not move, and where the genuine saving is. If your current scope is costing you complaints on Tuesdays, that is a fixable document rather than a reason to change providers.

Call (916) 376-8977 or request a facility visit online.